Secure C500 is a modern and flexible car alarm system that can be controlled both from the car’s original remote and from the optional Secure remote.

The C500 is compatible with all cars that use a digital data transmission network. Depending on the vehicle, it supports protocols such as CANBUS, K-BUS, LINBUS, and CODE.

In addition to its wide brand compatibility, the alarm is unique in its ability to send commands to the car over the CANBUS network, which significantly simplifies installation for some car brands.

If you want more remote controls than those supplied with the car, you can purchase the C-500 RF radio module with a remote. In this case, you can control the alarm and central locking from both the original remote and the Secure remote.

Both the installed car profile and all programming are set using a special computer program, which also makes installation easier (basic functions can also be changed via the service switch).

If your car has remote start, a pre-heater, or a convertible body, it is recommended to use a microwave sensor instead of an ultrasonic sensor.

Main features:

Open door/trunk/hood warning when arming
Memory for the last 5 alarms (readable via computer or LED indicator)
Temporary disabling and later re-enabling of sensors when opening the trunk with the remote
Alarm mode memory (restores previous mode after power loss)
Option to arm temporarily without sensors (e.g., if a dog is in the car)
Emergency disarm with a unique PIN code (if the remote does not work, e.g., battery is dead)
Re-arming if the doors are unlocked but not opened – selectable
Passive arming – selectable
Door locking while driving (linked to ignition) – selectable
Integration with the car’s original alarm (e.g., uses original motion and tilt sensors)
Control of hazard lights, electric windows, and central locking via the car’s CANBUS network