Small base camera with adjustable ball head NTSC, 1/4 inch CMOS HD wide angle 188° diagonal black. Can also be used as a front camera. Switchable handlebars, adjustable for cars/trucks. Possible base and superstructure. IP69K. Total cable 8.70m. Smaller than standard cameras on the market!

Mini NTSC front and rear camera with adjustable ball head 2 body. Easy to install using a cable-carrying threaded tube with a locking nut (housing 1) or a screw-on or glue-on housing (housing 2). Horizontal substructure and vertical mounting is possible by turning the ball. Professional system cable set with sufficient length and car connectors. Thanks to the small diameter connector, the cable can be installed more easily.

Product features
- Mini bullet camera NTSC (black) with 2 bodies
- Housing 1: threaded pipe with lock nut
- Housing 2: screwable or glued
- Optional housing 3: rubber ring for recessed installation (product no. HD-B168-02 must be ordered separately)
- Possible horizontal substructure and vertical attachment (by turning the ball)
- System cable with flow through, e.g. for reversing signal
- Mirroring can be turned off - can also be used as a front camera
- Sensor type CMOS 1/4 inch NTSC HD, low light sensitive
- Aperture F1.2
- Minimum illumination 0.01 lux,
- 960x480 HD resolution and 800 TV lines
- Angle horizontal 168°, vertical 118°, diagonal 188°
- Guide lines can be turned off
- The width of the control lines can be chosen between cars or trucks
- Protection class IP69K
- Suitable for continuous operation (ACC)
- Video connection: RCA connector
- Camera connector system: 4-pin 3V

Dimensions
- Camera body without screw (body 1) 24.2 x 24.35 x 22 mm (W x D x H)
- Camera connector diameter 4.5 mm
- Total cable length 8.70m

Technical specifications
Operating voltage +12V/24V DC (6~28V)
Current consumption 50mA
Operating temperature -30°C to +75°C
Storage temperature -40°C to +80°C